The Basics Of Pavement Rehabilitation: What To Expect

Page 3 – Picketts Paving LLC
May 23, 2022 at 9:34 AM

You may have noticed that many roads have gotten much worse in appearance recently. It is primarily due to deferred maintenance of one of the biggest enemies of any infrastructure – pavements.

When pavements are not properly maintained, they start showing wear and tear sooner, leading to big problems down the line if left unchecked. That is where pavement rehabilitation comes into play.

Pickett’s Paving LLC will explain pavement rehabilitation, how it’s done, and why it’s essential.

What is Pavement Rehabilitation?

Pavement rehabilitation is repairing and improving a pavement surface. The type of rehabilitation will be dependent on the severity of the damage. For example, a small crack in the pavement can be filled with sealant, while a more severe issue like potholes will require patching or pavement resurfacing.

Why is Pavement Rehabilitation Important?

Pavement rehabilitation is necessary because it can help extend the life of a pavement. You can prevent further deterioration and expensive repairs down the road by repairing damage early on.

Step-by-Step Process of Pavement Rehabilitation:

Pavement rehabilitation is vital to keep our roads in good condition. Here’s a step-by-step guide to the process:

Step # 1: Assessing the Damage:

The first step in any rehabilitation project is to assess the damage. Assessment will help determine the type and extent of work that needs to be done. It will also help to identify the most appropriate rehabilitation solution. This solution usually involves a visual inspection but may also include testing the pavement material.

Step # 2: Develop a Rehabilitation Plan:

The next step is to develop a rehabilitation plan. This plan will involve deciding what work needs to be done and how you will get it done. It would be best if you designed the plan to meet the specific needs of the pavement and the available budget.

Step # 3: Cleaning for Repair:

After the plan is in place, it’s time to clean up! That may involve power washing or sandblasting. This step aims to remove dirt & debris from your pavement so that any repairs will be successful.

Step # 4: Repairing Cracks and Joints:

Once you have cleaned the surface, the next step is to repair existing cracks or joints. Repairing may involve sealing, patching, or other methods of repair. The goal is to make the pavement as smooth and even as possible.

Step # 5: Applying a New Surface:

After the cracks and joints have been repaired, a new surface can be installed. A new surface may involve paving, resurfacing, or other construction methods. The goal is to create a new surface that is smooth and even.

Step # 6: Finishing Up:

After the new surface has been installed, the final step is to finish up. The finish may involve adding striping, signage, and other markings. The goal is to make the pavement look new again.

Bottom Line:

Pavement rehabilitation is a vital process to keep our roads in good condition. By following these steps carefully, you can expect your pavement to be smooth and even – and look like new in no time!

Contact Pickett’s Paving LLC if you have any questions about pavement rehabilitation in Viroqua, WI, or would like to get a free quote.

The post The Basics Of Pavement Rehabilitation: What To Expect appeared first on Picketts Paving LLC.