July 19, 2021 at 11:07 AM
Although asphalt paving provides long-term value for your property, some problems may emerge later due to negligence by the pavement contractor. This is why in addition to getting a reliable pavement contractor on board, you must also ensure that the team follows the prescribed guidelines for pavement installation.
While hiring a reliable and professional contractor like Pickett’s Paving LLC, serving customers in Lacrosse and several other cities in Wisconsin and Florida may reduce the prospects of such negligence, you still need to stay vigilant throughout the entire paving process.
Here is an asphalt paving checklist for property owners’ or managers’ reference to ensure that the pavement contractor follows them.
1. Get the Right Pavement Contractor
As with any other trade, the best way to ensure a job is done well is by hiring the right person for the job. Thus, when embarking on an asphalt paving project you should hire an experienced and reputable contractor. The following guidelines will help you narrow down the list of prospective contractors.
- Contact your local county or state agency, where they will be able to provide information about approved firms.
- Check online reviews of your short-listed contractors.
- Check references of previous clients from these contractors.
- Ensure that the contractor’s team has the skills and experience required for your project.
- Compare the prices they offer
2. Check the Materials
Some contractors use sub-par materials that have a high risk of cracking and leaking. Asphalt paving products from top manufacturers are your best option. The contractor should use the correct asphalt mixture and asphalt binder type to ensure your pavement lasts as long as possible.
1. Allow the Team to Leave Without Final Inspection of the Project
Don’t let the construction team leave the job site before you carry out a detailed inspection. This is very important because you must ensure that they didn’t leave behind equipment or construction material on the property, or worse, miss any critical steps in a particular process!
2. Let Anyone Walk Over the Freshly Paved Surface
Asphalt will lose its hardness if people begin walking on it right after paving is finished. Also, don’t allow anyone to drive over a freshly paved surface. Asphalt may be hot and sticky for up to 24 hours after being laid, so it must be allowed to settle properly for at least this amount of time.
Pickett’s Paving LLC provides residents of LaCrosse, WI, with premier asphalt paving and maintenance services. As an experienced pavement contractor, we ensure that our clients are satisfied with our services and that they can enjoy the fruits of a freshly paved surface for years to come.
Get a free quote for our services.